Knowledge

Index > News > Knowledge

Knowledge

  • Glass partition installation must have little comm

    Glass partition can be a good home for the division of the room, due to the transparency of fireproof glass, but also does not allow space to b...

    2017-08-20

  • The office high partition door

    Company engineering, the installation of office glass partition is the need for professional and technical, the general decoration company is not professional enough, the enterprise itself is not to save money and their own hands-on installation, office high partition installation is in place related to the use of security. Perhaps we see high compartment installation technician at installation time feel nothing difficult ah, is the point of junction stay put, there are some of the more important details not contempt, PDA group of Beijing glass partition installation engineer will inform you these little details, to teach you how to identify high install office cubicle partition door of the little details.

    1, in the installation of office glass partition door, the top of the door and the door can be opened on the following axis, to prevent the door can not be opened and closed;

    2, fire glass doors to use steel weighing skeleton, support the rotation of the shaft must be welded on the balance beam to prevent the door shaft due to prolonged use and fall off;

    3, spring in the pre buried to dig a rectangular hole in the ground area, it is the spring base 10mm, and by the strength of cement sealed, 48 hours after the cement solidification can be installed in the glass door, the door along the distance from 8 to 12mm, to prevent the door from sagging wipe;

    4, the door to the bottom of the door to the center of the door frame, the installation of the glass door on the beautiful;

    5, fire glass doors on the beam along the distance from 3 to 6mm, to prevent the door and the door clamp connection will not fall off;

    6, fire glass doors installed, to connect to the site and door clip and get some butter, can make the door rotate flexibly, can also use more time.

    PDA Group Beijing glass partition, professional glass partition production and installation of two decades, tailor-made for you various types of glass partition, fire glass partition the profile.

    ...

    2017-08-17

  • Beijing fire glass partition decoration taboo

    People's Republic of China Ministry of housing and urban rural development, No. 830th red paper, is now approved the "residential interior deco...

    2017-08-17

  • 办公室玻璃隔断的种类介绍

          隔断是一种到顶的,可完全划分空间的高隔断,又称高隔间。专业型的高隔断间,不仅能实现传统的空间分隔的功能,而且他在采光、隔音、防火、环保、易安装、玻璃隔断可重复利用、可批量生产等特点上明显优于传统隔墙。   1、普通玻...

    2017-03-03

  • 晶莹剔透的玻璃隔断,引领时下的装修潮流

        为了使居室宽敞明亮,看起来比实际面积大,很多小户型装修选择用玻璃隔断墙代替传统的墙壁,因为玻璃晶莹剔透的性质和装饰效果明显的优势,已经加入了装修设计的考虑范围之中,深受人们的喜爱,那么对于如何选择玻璃隔断呢,PDA北京玻璃隔断君教您以下三点:

        1.考虑使用哪种框架结构, 组成结构所使用的金属材料及结构断面是否符合抗侧撞击的要求并通过相关检测。
     
     2.玻璃的选择, 就是挑选花纹。裂纹舒展清新的效果最好。夹层玻璃隔断与防火玻璃隔断在意外撞击发生时,玻璃碎片将被牢固地粘在玻璃中的薄膜上,不会四散崩溅出碎片,可以说夹层玻璃是完全意义上的安全玻璃。
     
      喷砂刻花玻璃隔断其朦胧和近乎奢华的效果,是其他类型的产品所不可比拟的。刻花和喷砂玻璃隔断对材料的要求也是最为苛刻的。玻璃隔断最好是由强度高、安全性能卓越的原料防火玻璃来制作,钢化玻璃和夹层玻璃等都能满足其要求。但当玻璃雕刻时,钢化玻璃的强度将会急剧降低,甚至每一道表面的划痕都加大了崩裂的危险,所以用作隔断的安全性较差。
     
      3.可选择热熔玻璃,又称水晶立体艺术玻璃,由于外形豪华、美观、立体感强,开始成为卫生间的局部“亮点”,它是目前国际上最为流行的玻璃饰品,装饰性能强。

        PDA集团,专业防火玻璃隔断二十年,为您提供最新最全的玻璃隔断系统解决方案。

    ...

    2017-03-03

  • 注重玻璃隔断保养,延长高隔间的使用寿命

         玻璃隔断是非常普遍的装修布局,但是有很多人装修了之后不注意玻璃隔断的保养,长期以来会出现很多这样那样的问题。随着北京玻璃隔断的使用越来越多,那么高隔间玻璃隔断该如何保养呢?

      高隔间玻璃隔断的保养不止是装修过程中的注意事项,更重要的是后期的维护和保养,这样才能增加玻璃隔断的使用寿命,而且也避免了维修带来的不便。玻璃隔断尤其是防火玻璃隔断的保养和维护,在安装玻璃隔断时要注意保护隔断,固定要牢固,防止施工过程中造成隔断被划留下划痕,运输隔断墙时要注意轻拿轻放,小心防火玻璃碰坏。在日常使用中,要保持隔断的干净整洁,不要往隔断上面乱挂物品,要定期或者不定期清理隔断墙面。避免用重物挤压或者撞击隔断,防止隔断墙固定不稳动摇。 

      以下关于办公玻璃隔断的保养的几点更是要注意:
      1、勿以利器在高隔间墙体外表直接切、割、击打、避免在外表留下刮痕、裂缝及沟孔。
      2、清洗时不要选用有磨料、强酸成份的卫生剂,避免损伤木板或玻璃外表。
      3、胶条是防火玻璃隔断的密封材料,隔音和防水的要害,如有掉落要及时修补,替换。
      4、铝合金玻璃隔断在使用过程中,应轻推轻拉,推拉顺从其安装方式;
      5、铝合金玻璃间隔积灰,变形是铝合金高隔间老化的主要原因,要坚持铝合金卫生,特别是拼接缝的卫生。可用吸尘器吸去槽内和胶条的积灰。
      办公室的玻璃隔断保养的好可以增加玻璃隔断墙使用寿命,还能保持隔断的牢固性保证人的安全。办公隔断的保养和维护的重要性,可以节省维修时间和更换玻璃隔断的费用。

    ...

    2017-03-03

  • 北京玻璃隔断施工方案

    1、施工准备 1) 材料构配件玻璃采用钢化防火玻璃材料在玻璃制品工厂加工制作 2) 主要机具 机具:电锤 工具:丝锥、螺丝刀、玻璃胶枪等 2、工艺流程 施工程序:测量放线-材料订购-上、下部位钢件制作安装-安装玻璃-涂胶-清洗。 1) 测量放线:根...

    2017-03-02

Factory exhibition hall

More >>

Contact Us

  • Room 1A,Building 2,Dajiaoting Street ,Chaoyang District,Beijing
  • 010-87723967 , 87723070
  • info@pda-bj.com
  • http://www.pda-bj.com